Canon EOS Mirrorless Camera Adapter with large diameter stainless steel “RF” Lens bayonet. For all 3.5" and most 4" Field Flatteners and TCC Telecompressor Correctors. (ADACAN-RF)
- SKU:
- ADACAN-RF
- Price:
- To be determined
In March 2024, we introduced adapters for popular mirrorless Nikon Z and Canon EOS RF cameras to be used with our 3.5" and 4" Field Flatteners and Telecompressor Correctors (TCC) listed below.
This Camera Adapter for Canon RF mirrorless cameras with its large inside diameter bayonet minimizes vignetting on full-frame sensors by eliminating the restrictive 1.5" (38 mm) diameter standard T-thread interface.
The adapter body is precision-machined aluminum and black-anodized. The bayonet is machined stainless steel, and both the body and the bayonet are baffled and painted flat-black on the inside.
The ADACAN-RF will place the camera sensor at the perfect 80.8mm distance from the rear flange of the recommended back-focus spacer of the field flattener or TCC. Refer to the DSLR & Mirrorless Camera System diagrams below.
Designed for:
- 110TCC and 110FF
- 13035FF-2, 13035FF-3, 13035TCC-3 and 13035TCC-2
- QUADTCC-155 and QUADTCC (all versions)
- 14035FF and 180F7FF
- Legacy field flatteners: 160FF, 175FF
- Legacy telecompressor correctors: 155TCC, 160TCC, 175TCC
Specifications
- Net spacing distance: 2.39" (60.8 mm)
- Camera adapter: Nikon Z camera
- Female threads: 3.27 x 16tpi to use with the back-focus spacer specified for your field flattener or TCC.
Please note: this adapter can NOT be used with Canon "EF" or "FD" camera bodies.
Diagrams and Instructions
Refer to the following diagrams for additional information regarding spacing.
Current recommendations:
- 110GTX DSLR and Mirrorless Camera System Diagram
- 130GTX DSLR and Mirrorless Camera System Diagram
- 175 & 160 CCD Field Flattener Spacing Requirements, includes legacy adapters, consider ADANIK-Z instead
- 0.76x 155TCC, 160TCC & 175TCC Telecompressor Corrector Spacing Requirements, includes legacy adapters, consider ADANIK-Z instead
- 0.72x QUADTCC (all versions) Telecompressor Corrector Spacing Requirements, includes legacy adapters, consider ADANIK-Z instead
Legacy documents for your reference in case you own some of these components:
- If you own items not shown in the diagrams above, please refer to the Discontinued Products section of this website and Technical Support for Legacy Products that are No Longer Available.
Custom Spacers & Adapters
If you need a spacer or adapter for a configuration that is not described above, we recommend that you contact PreciseParts. You may also review the following diagram that shows additional components you might find useful. Keep in mind that some are legacy parts: Field Flatteners, TCCs & QUADTCC Imaging Train Options
Astro-Physics 80.8mm Back-focus Spacing Distance
For more information regarding the concept for the 80.8mm back-focus spacing distance, refer to this webpage: Spacers & Extensions
